How to connect the fiber optic jumper?Optical fiber jumper is a connection line used to connect optical fiber equipment,which plays a vital role in optical fiber communication.Correctly connecting the fiber jumper can ensure the transmission quality and stability of the optical signal.Fibercan Optical Cable will introduce you to the wiring method of fiber optic jumpers.
First of all,you need to prepare the corresponding tools and materials to connect the fiber jumper.You need to prepare tools and equipment such as optical fiber jumpers,optical fiber connectors,optical fiber cleavers,and optical fiber fusion splicers.
The first step in wiring is to prepare fiber optic jumpers.Peel off the protective cover at both ends of the fiber jumper to expose a certain length of bare fiber.Take care to maintain the integrity of the fiber and avoid damage to the fiber.
The second step of wiring is to cut and clean the optical fiber.Use an optical fiber cleaver to cut the optical fiber into a flat end face,and wipe the end face of the optical fiber with a clean paper towel or cotton swab dipped in an appropriate amount of detergent to ensure that the end face of the optical fiber is clean and smooth.
The third step of wiring is to perform fusion splicing of optical fibers.Insert the fiber optic connector into the fiber fusion splicer,and operate according to the operation guide of the fusion splicer.Normally,the fusion splicer automatically completes the fusion splicing and fixing of the optical fiber.
The last step in wiring is to protect the optical fiber.Put the fused optical fiber connector into the optical fiber protective sleeve,and then use heat shrinkable tube or other protective materials to fix and protect the optical fiber connector.Ensure the stability and protection of optical fiber connectors to prevent damage and loosening of optical fibers.
After the fiber jumper is connected,it is necessary to test and verify the fiber.Use fiber optic testing equipment to test fiber optic jumpers to ensure the transmission quality and stability of optical signals.
To sum up,to connect the fiber jumper,you need to prepare tools and materials,cut and clean the fiber,fuse and fix the fiber,and finally protect and test the fiber.Correctly connecting fiber jumpers can ensure the transmission quality and stability of optical signals,and improve the performance and reliability of fiber optic communication.When wiring fiber optic jumpers,it is recommended to follow the relevant operating guidelines and safety regulations to ensure the safety and correctness of the operation.
